After doing a search on this, I found only one mention of this and the person suggested splicing wires together. Not a nice solution.

Does anyone out there know the part number/service kit number from Mazda for the body side harness connectors that plug into the '99 JDM spec combo lights?

I am hoping to come up with a jumper harness that plugs into the stock harness but need the light connectors.

Thanks for the help.

 

I'd like help here as well. I further think it would be nice if the seller would at least provide some instructions.

 

splice wires... solder, and heat srink them, nothin un professional about that...

 

There are no harnesses for it, but your welcome to contribute and make one for the community if you please. 99 jspec lights were only ment for 99 and up FD's, and mazda didnt mean for the older ones to use them. Plus there is not enough money to be made to make a harness for it as well, so thats the only way your going to run them. If you cant do it yourself, take it to a good stereo shop and they should beable to do it for you no problem.

oh i just read the second part of your question again, if you going to actually order the end connectors for it, its not worth the money either.

 

I'll do some research on this. I was hoping that someone could identify the supplier and part number for the connectors for me. I assume that Yazaki does it (as they supply most of the FD wiring harnesses). If I work this out, maybe I will put a kit together and sell through others with the light kits.

If anyone can identify a manufacturer and part number for me, I would be most appreciative.

I hate splicing and soldering. I always find my self on the side of the road in a rainy night wondering why I didn't do it right the first time.

Thanks anyway.