99---> 93 parts compatibility questions
05-03-04, 12:20 PM
#1
99---> 93 parts compatibility questions
Do all models of the 99+ cars use the same turbos? The ones with the abradable seals?
When running 99+ front brakes on a 93 car do you need to swap out the master cyl or proportioning valve?
Did they change the oil cooler(s) on the later cars or are they all the same?
TIA!
Jeff
When running 99+ front brakes on a 93 car do you need to swap out the master cyl or proportioning valve?
Did they change the oil cooler(s) on the later cars or are they all the same?
TIA!
Jeff
05-03-04, 01:23 PM
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Re: 99---> 93 parts compatibility questions
Originally posted by turbojeff
Do all models of the 99+ cars use the same turbos? The ones with the abradable seals?
When running 99+ front brakes on a 93 car do you need to swap out the master cyl or proportioning valve?
Did they change the oil cooler(s) on the later cars or are they all the same?
Do all models of the 99+ cars use the same turbos? The ones with the abradable seals?
When running 99+ front brakes on a 93 car do you need to swap out the master cyl or proportioning valve?
Did they change the oil cooler(s) on the later cars or are they all the same?
2. No. Only the RS/RZ models used the bigger rotors. Calipers still use same piston area I believe (pads are same size). In any case, you don't need to change master cylinder or proportioning valve.
3. Don't know that one.
05-03-04, 03:45 PM
#4
Lives on the Forum
Dunno about oil coolers (Mazda Motorsports thinks they are the same) but I know the "big" brakes use the same master cylinder and proportioning valve, so you could even use the 929 master too if you pleased.
Thread
Thread Starter
Forum
Replies
Last Post