Troux

iTrader: (6)

For those that don't know, Mazda moved to a coarser thread pitch for the '94+ inner tie rods (where it threads into the rack). I have a '94, and I may need to buy a new tie rod, but everywhere I look lists the same part number for '93-'95 racks.

Has anyone with a '94-'95 had to replace their inner tie rods before? Where did you source them from? Thanks.

kyleaudio

iTrader: (22)

Try contacting Ray Crowe at Malloy Mazda, he may be able to help.

phone - 888-533-3400
email - HMKParts@aol.com

dgeesaman

iTrader: (7)

Check the VIN first. I have a 94 and mine had the older style threads. When I looked up in the PDF parts lists I saw it and kicked myself.

David

Troux

iTrader: (6)

^Dunno about the build date (August '94, I think?), but I figured a caliper and a pitch gauge were good enough.

dgeesaman

iTrader: (7)

The later design is M16 x 1.5mm. The earlier design is a finer thread pitch. I still have a later design tie rod from Mazda because I opened the bag before I realized my mistake and couldn't return it.

M104-AMG

iTrader: (8)

BTW: just removed my donor 1993 inner tie-rod and measured the following:

rod to rack: M16 x 1.0 (fine thread)
tie-rod end: M12 x 1.25

:-) neil

M104-AMG

iTrader: (8)

Want to sell it ?

:-) neil