Sammy Built

iTrader: (18)

ok i diagnose my rx7 2 days ago its a 93 touring edition witha remanufactured engine.The car symptons were when the car got to regular temperature it would turn the check engine light on. The car would idle irraticaly like a vacum hose just came off and then would not rev up more then 4k rpms.Really it would just break up within the rev but anyways. I pulled the code up on the cluster and it said code 27 . which is the metering pump. so i started trying to get to the metering pump out and got stuck on trying to pull the bottom bolt on the metering pump. Just wondering if anybody have a solution on pulling this out. Just really wondering if anybodys changed with not pull the turbos out or the rack and pinion. thats were the bolt is in between but any help would sure be apperciated !!!!!!!!!!! thanks

Mahjik

iTrader: (1)

Some talk here:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/advice-omp-mop-replacement-672512/

Sounds like you can gain some remove by removing the actuators on the turbos.

Sammy Built

iTrader: (18)

thanks man ur always a big help ^^^^^