929 Master Cylinder Leak
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Boston, MA 02130
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
929 Master Cylinder Leak
I did the 929 conversion some months ago and have noticed a odd leak. It appears the leak is coming from the bushings that hold the brake fluid reservoir to the body of the cylinder. The 929 was a new rebuilt unit, that came with new bushings that we installed. Anyone run into this??
#2
RX-7 Bad Ass
iTrader: (55)
Could be the reservoir has a hairline crack around the nipples at the bottom that fit into the grommets. That's not an uncommon FC problem, usually caused by leaning against the reservoir.
Not sure if you can get JUST the reservoir or not.
Dale
Not sure if you can get JUST the reservoir or not.
Dale
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Boston, MA 02130
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaleClark
Could be the reservoir has a hairline crack around the nipples at the bottom that fit into the grommets. That's not an uncommon FC problem, usually caused by leaning against the reservoir.
Not sure if you can get JUST the reservoir or not.
Dale
Not sure if you can get JUST the reservoir or not.
Dale
good point..Thanks