5th Gear Syncro Tool Question
04-27-09, 12:20 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Chicago
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
5th Gear Syncro Tool Question
I am about to start my syncro job but am having trouble finding the large puller needed. I was wondering if a 11-12 inch puller would be long enough to pull the bearing off or does it need to be longer. I just want to make sure I have all the tools needed for the job.
Thanks Guys
-Steve
Thanks Guys
-Steve
04-27-09, 04:42 PM
#2
Looks like a 12" puller will still be too short (from the stickys)......
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/5th-gear-synchro-138279/#post1284686
http://mahjik.homestead.com/files/ho...o/synchro.html
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/5th-gear-synchro-138279/#post1284686
http://mahjik.homestead.com/files/ho...o/synchro.html
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
