MOBEONER

iTrader: (18)

I have a 5 speed wire harness but under the dash connectors are from an automatic
is there a schematic on how to make this work?

I am sure the info is some where in the (search engine) but i want a quick jump to the correct info.

EvilAreXeven

iTrader: (20)

Either way you slice it, you're going to need another harness, whether that be a manual dash harness, or an auto engine main harness. The big blue connectors (ecu side) are different from auto/manual. This makes it difficult to mate auto engine harness -> 5 speed dash harness or vice versa. If you could find yourself those ecu side 5 speed dash harness plugs, you could probably make it work with a careful study of the wiring schematics, but if you wish to keep it plug and play, you'll need one of the aforementioned harnesses.

Erix7rew

iTrader: (7)

I convert my fd from automatic to manuel and the best way to do it is to change the front main harness, the dash harness and the one that travel on the inside of firewall. I buy all my harness from Fritz Flinn on this forum

Or searh here under auto to manuel swap https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/

Good luck!

Eric

MOBEONER

iTrader: (18)

some one close this thread.