4.44 gearing and 450+ whp
4.44 gearing and 450+ whp
Hoping to get some feedback on if it’s worth following through with power levels above 450.
Have purchased a set and was wondering if it will still be a worth while mod or if I am better off using the original 4.10 or maybe even using a 3.90 instead.
Originally had plan to use it in a stock setup which I know it would shine but when power is factored in would it still be worth it?
Have purchased a set and was wondering if it will still be a worth while mod or if I am better off using the original 4.10 or maybe even using a 3.90 instead.
Originally had plan to use it in a stock setup which I know it would shine but when power is factored in would it still be worth it?
It completely depends on what you're trying to do and even then you'll get differing opinions - mine is that anything after 350 a 3.9 is very appealing for 1st - 3rd for anything but autocrossing or the like.
No experience with a 4.4 but my car is a 4.7 and had "400"hp. The only thing keeping it manageable was the immense lag from my too big turbo. There were times that it would spin MID PULL. I could not imagine what 450+ would be like.
On the twins it was absolutely incredible. Phenomenal actually. The most incredible. I could cry talking about it. A 4.7 is not a 4.4 but it's close enough I guess. Just something to go off of
On the twins it was absolutely incredible. Phenomenal actually. The most incredible. I could cry talking about it. A 4.7 is not a 4.4 but it's close enough I guess. Just something to go off of
Thread
Thread Starter
Forum
Replies
Last Post
darkprince134
2nd Generation Specific (1986-1992)
6
Sep 27, 2005 10:17 PM
MazdaRx7Racer4Life
3rd Generation Specific (1993-2002)
33
Jan 24, 2004 12:48 AM







