3mm redline?
Thread Starter
Joined: Sep 2001
Posts: 195
Likes: 0
From: Lost Wages NV
3mm redline?
hey guys, my new motor is a 3mm streetport with all the oil mods etc. I hear that the 3mm seals 'float' at a lower RPM then the 2mm, and I was wondering if I would still be able to drive it to 8k RPM or would it float too much to really be of any use. also can someone define what floating is exactly?
Rotary Enthusiast
Joined: Feb 2001
Posts: 985
Likes: 0
From: Montreal, PQ
If the 3mm were installed correctly they won't float or chatter at all.
My understanding about redlin eis that it is pointless to raise it, although you can, it won't make you much more power at all.
My understanding about redlin eis that it is pointless to raise it, although you can, it won't make you much more power at all.
going ls
Joined: Jan 2002
Posts: 602
Likes: 0
From: South Florida
yo should be shifting at about 72-7300 rpms anyway, there is a power dropoff anywhere past there and its been dyno proven. its the adrenalin thats telling you that your going faster when u take it to 8k.
Senior Member
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
Originally posted by Quik 93 FD
yo should be shifting at about 72-7300 rpms anyway, there is a power dropoff anywhere past there and its been dyno proven. its the adrenalin thats telling you that your going faster when u take it to 8k.
yo should be shifting at about 72-7300 rpms anyway, there is a power dropoff anywhere past there and its been dyno proven. its the adrenalin thats telling you that your going faster when u take it to 8k.
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
Jul 17, 2019 02:20 PM