I can't find one on the net or locally. Does anyone have a source for these?? It's spring and I can't get my car running without it.

 

I got mine at Car Quest, its a Gates belt.

 

yeah carquest is the best place for belts..

 

http://www.banzai-racing.com/ has a 5-rib 30.7" belt that works with greddy pulleys (or ebay pulleys). If that is what you are looking for...

 

i ended up getting the greddy replacent belt from Banzai racing for 25.00 incluedes shipping. i looked everywhere even carquest and they couldnt match the belt size.

 

I have the Banzai 30.7 inch (too long) and the Banzai 29 inch (too short). Need to return those by the way. I need a 30 inch 5 rib belt. I will have to go to the other engine and see what kind of power pulley it has. Maybe one of the belts I have will fit then. I had an engine swap and I don't think they switched the pullies, even though they charged me for it. IPS Motorsports in Columbus, Ohio. Rip off artists.

 

Just get a 4 rib. It will work fine and I'm sure you'll find one local.

 

i had the same problem with the banzai belts because i thought my Unorthodox 3 pulley set was underdrive... i had to go with 2 belts from NAPA instead.. they have 5 rib belts but not 6 rib

 

I just modified the alt adjustment slot and made it work!

 

We notice that the biggest mistake people make is thinking that the UR Alt, WP, & PS pulleys are underdrive. They are stock size and when used in conjunction with the UR main underdrive pulley without the smog pump makes for a very bad setup with virtually no contact area on the WP pulley. This is worse that trying to run the stock pulleys without the smog pump.

I do not know how much more clear we can make it on out site, we give the standard and metric sizes, the pulley combos that they work with etc. We even have notes such as:
"NOTE: fits GReddy Pulley Kit for Smog Elimination, Indigo Pulleys, Ebay Pulleys, etc."

and:
Underdrive Main* refers to all Power Pulleys; e.g Unorthodox, SR Motorsports, Pettit, etc.
Underdrive Water pump* refers to GReddy, Indigo, Ebay, Etc.
Underdrive Alternator* refers to GReddy, Indigo, Ebay, Etc.

NOTE: Unorthodox Water pump and Alternator Pulleys are stock size.

We even advise people to verify the length that they need prior to purchasing.

Please verify the length of the belt you require prior to placing your order, as these belts are non-returnable. Thank you.


OP- If belt #3 is too long and #2 is too short, then it sounds like you don't have any underdrive pulleys and are running all stock with no smog, we do not offer a belt for that setup as we do not recommend it as being safe.

 

NAPA is your friend.

I had to return 2 belts before I got the size right - no problem with them, and they have every size imaginable.

 

[QUOTE OP- If belt #3 is too long and #2 is too short, then it sounds like you don't have any underdrive pulleys and are running all stock with no smog, we do not offer a belt for that setup as we do not recommend it as being safe.[/QUOTE]

What would be the negatives of running it this way? I belive that the wya mine is set up. I havnt actually driven the car yet with this set up so its not to late to fix. Just would like to know what will happen if it is ran this way.

 

Very limited contact area with the water pump, which would allow for the belt to slip by. If this is your current setup most likely you can spin the water pump pulley by hand, even with the belt fully tight.

 

So if you did have this what would be your suggestion to fixing it???
that is the water pump pulley belt not having enough tension...