3 weeks 2 days to build racecar number 2!
3 weeks 2 days to build racecar number 2!
Junior Member
Joined: Mar 2008
Posts: 24
Likes: 0
From: WILTSHIRE
Nurburg Stag
HI ALL AND STEADY THERE,FINITES JST STARTED A THREAD 4ME.
I CAN FABRICATE BUT NOT COMPUTICATE,LOOK FOR`28 DAYS TO BUILD A RACECAR AND READ THAT FIRST.
MIGHTVE POSTED SUMMIT HEAR BY TIME UVE SEEN THAT...CHEERS
BREED
I CAN FABRICATE BUT NOT COMPUTICATE,LOOK FOR`28 DAYS TO BUILD A RACECAR AND READ THAT FIRST.
MIGHTVE POSTED SUMMIT HEAR BY TIME UVE SEEN THAT...CHEERS
BREED
Full Member
Joined: May 2006
Posts: 136
Likes: 0
From: Indianapolis, IN
Thread Starter
Junior Member
Joined: Feb 2008
Posts: 21
Likes: 0
From: UK
errr so maybe i should clear the confusion up!
String (BREED) is currently trying to type a post into this thread that I started for him (just don't ask!). As the poor bastard is now on his third attempt at writing the same post I'm just going to ask everyone to take a sit down for a while and enjoy the "elevator music" while we have a brief interlude in proceedings....
*please hold your call is important to us*
String (BREED) is currently trying to type a post into this thread that I started for him (just don't ask!). As the poor bastard is now on his third attempt at writing the same post I'm just going to ask everyone to take a sit down for a while and enjoy the "elevator music" while we have a brief interlude in proceedings....
*please hold your call is important to us*
Trending Topics
-IBTL
Junior Member
Joined: Mar 2008
Posts: 24
Likes: 0
From: WILTSHIRE
Spec ; 93 Breed Fd3s
Stripped Interior,lost Boot Floor,built Twin Ally Tanks,sponsored Rx Motors Rebuild(extended Streetport)td06 25g,big Manifold,100mm Thick Vmount,80mm Thick Rad,nip N Tune Power Fc,aeromotive Fuelling,sponsored Nitron Nsx/rx7 Hybrid Suspension.....and A Few Bits More..............
lol
Junior Member
Joined: Mar 2008
Posts: 24
Likes: 0
From: WILTSHIRE
Got The Fuel Pump Today,very Nice,and The Pre Pump Fuel Filter Should Be Here Monday.cant Decide If I Can Stand Hiding The Pump Though..i Was Goin To Mount It Off The Tank Bracket In The Gap Between Tanks Next To The Outlet But I May Just Put The Filter There .
Tomorrow Ile Make A Rollover Brace To Stop The Tanks Coming Through The Ally Cover That`l Be Over The Boothole.its Just The Right Size To Pull Out The Top Should I Need To,all By Fate Really.ive Had The Tanks Along Time As They Were Given To Me So It Jst Happened That They Fit So Well,two Doughnuts Later Whilst Ide Removed The Boot Floor And Me Mate Andy Very Nicely Had Them Tig`d Together With A Collection Pot Added One End Where The Baffled Parts Of Each Tank Are.should Work Ok With A -10 Outlet,dnt Think We`ll Pull Any More G`s Than A Caterham Does !.
Engine Should Be Ready Wednesday,exhaust Ports Are Now Mahoossive,
Ile Cut The Front Slam Panels Off Tomorrow And Brace Across Chassis Rails Infront Of The Engine With Either Some T45 Or What I Find.
Dnt Need Front Bumper So Ile Build A Light Tube Frame To Support I/c,rad And Nosecone.
Tomorrow Ile Make A Rollover Brace To Stop The Tanks Coming Through The Ally Cover That`l Be Over The Boothole.its Just The Right Size To Pull Out The Top Should I Need To,all By Fate Really.ive Had The Tanks Along Time As They Were Given To Me So It Jst Happened That They Fit So Well,two Doughnuts Later Whilst Ide Removed The Boot Floor And Me Mate Andy Very Nicely Had Them Tig`d Together With A Collection Pot Added One End Where The Baffled Parts Of Each Tank Are.should Work Ok With A -10 Outlet,dnt Think We`ll Pull Any More G`s Than A Caterham Does !.
Engine Should Be Ready Wednesday,exhaust Ports Are Now Mahoossive,
Ile Cut The Front Slam Panels Off Tomorrow And Brace Across Chassis Rails Infront Of The Engine With Either Some T45 Or What I Find.
Dnt Need Front Bumper So Ile Build A Light Tube Frame To Support I/c,rad And Nosecone.
Junior Member
Joined: Mar 2008
Posts: 24
Likes: 0
From: WILTSHIRE
Got The Fuel Pump Today,very Nice,and The Pre Pump Fuel Filter Should Be Here Monday.cant Decide If I Can Stand Hiding The Pump Though..i Was Goin To Mount It Off The Tank Bracket In The Gap Between Tanks Next To The Outlet But I May Just Put The Filter There .
Tomorrow Ile Make A Rollover Brace To Stop The Tanks Coming Through The Ally Cover That`l Be Over The Boothole.its Just The Right Size To Pull Out The Top Should I Need To,all By Fate Really.ive Had The Tanks Along Time As They Were Given To Me So It Jst Happened That They Fit So Well,two Doughnuts Later Whilst Ide Removed The Boot Floor And Me Mate Andy Very Nicely Had Them Tig`d Together With A Collection Pot Added One End Where The Baffled Parts Of Each Tank Are.should Work Ok With A -10 Outlet,dnt Think We`ll Pull Any More G`s Than A Caterham Does !.
Engine Should Be Ready Wednesday,exhaust Ports Are Now Mahoossive,
Ile Cut The Front Slam Panels Off Tomorrow And Brace Across Chassis Rails Infront Of The Engine With Either Some T45 Or What I Find.
Dnt Need Front Bumper So Ile Build A Light Tube Frame To Support I/c,rad And Nosecone.
Tomorrow Ile Make A Rollover Brace To Stop The Tanks Coming Through The Ally Cover That`l Be Over The Boothole.its Just The Right Size To Pull Out The Top Should I Need To,all By Fate Really.ive Had The Tanks Along Time As They Were Given To Me So It Jst Happened That They Fit So Well,two Doughnuts Later Whilst Ide Removed The Boot Floor And Me Mate Andy Very Nicely Had Them Tig`d Together With A Collection Pot Added One End Where The Baffled Parts Of Each Tank Are.should Work Ok With A -10 Outlet,dnt Think We`ll Pull Any More G`s Than A Caterham Does !.
Engine Should Be Ready Wednesday,exhaust Ports Are Now Mahoossive,
Ile Cut The Front Slam Panels Off Tomorrow And Brace Across Chassis Rails Infront Of The Engine With Either Some T45 Or What I Find.
Dnt Need Front Bumper So Ile Build A Light Tube Frame To Support I/c,rad And Nosecone.