I recently bought a 3 bar MAP sensor from Gotham Racing, and went to put it on but it dose not plug in to the stock wiring harness. I was wondering if you guys knew off hand what it would take. Maybe some kind of a adapter. I am not very good at searching I found out last night.

 

search for "bar map sensor" in the PFC subforum

 

If it is a GM part then you will need a GM weather pac connector that fits,but wait the GM part is green and cost $ 27 .Two bad things .If you get a regular 3 wire GM weather pac connector it will be black and cost about $ 4 ,I think as I buy them by the box of 5 . The black connector will need to have the position key cut away.I do that with a small drimmel tool . I do not remember what color wires go to each connector pin,I am sure someone on here knows,I would have to look .

 

I need to buy the connector kit and get it set up by sunday. Dose anyone know where I can purchase one? I live near St.Louis.

 

Try the local auto parts or pay the GM dealer $27 .I would sell you one but most people on the forum never pay me for what I send, so I lose shipping and the part .