3 bar MAP sensor
#1
Bosozoku
Thread Starter
Join Date: Sep 2004
Location: O'Fallon MO
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
3 bar MAP sensor
I recently bought a 3 bar MAP sensor from Gotham Racing, and went to put it on but it dose not plug in to the stock wiring harness. I was wondering if you guys knew off hand what it would take. Maybe some kind of a adapter. I am not very good at searching I found out last night.
#3
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
If it is a GM part then you will need a GM weather pac connector that fits,but wait the GM part is green and cost $ 27 .Two bad things .If you get a regular 3 wire GM weather pac connector it will be black and cost about $ 4 ,I think as I buy them by the box of 5 . The black connector will need to have the position key cut away.I do that with a small drimmel tool . I do not remember what color wires go to each connector pin,I am sure someone on here knows,I would have to look .
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM