20B Conversion, need custom fabricator
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: Anaheim
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
20B Conversion, need custom fabricator
I'm about to do a 20B conversion to my 3rd gen. If anyone knows anyone that would do a custom subframe so I won't have to do a lot of fabrication and ripping out the firewall, please let me know. I live in the Orange County area. I'm also hoping to find someone that would be able to fabricate a custom manifold for the turbo set up I have in mind. Please let me know. I'm trying to take a different route than what most rotary specialists do.
#2
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
www.pettitracing.com they wanted $2300.00 for the subframe + spindles + your old subframe. This price might have went up a little but I'm pretty sure it's still somewhere around there.
www.racingbeat.com sells a 3 rotor flange to help you make your own manifold or you can try www.mariahmotorsports.com which supposedly makes 3 rotor single turbo kits. Or you may be able to source a 3 rotor/single turbo/FD manifold from one of the aussies/NZ guys in the single turbo section as they might have a source for one "down under"..
Hope this helps..
www.racingbeat.com sells a 3 rotor flange to help you make your own manifold or you can try www.mariahmotorsports.com which supposedly makes 3 rotor single turbo kits. Or you may be able to source a 3 rotor/single turbo/FD manifold from one of the aussies/NZ guys in the single turbo section as they might have a source for one "down under"..
Hope this helps..
#3
http://www.grannysspeedshop.com/ is all you need. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post