2000 Jap spec wiring diagrams?
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Sacramento,CA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
2000 Jap spec wiring diagrams?
I need to wire a 94 RX7 to accept a 2000 spec motor!! I have the complete engine, harness, computer, etc. All that is left is to find out what wire does what under the dash and elsewhere. PLEASE HELP find
engine and powertrain management diagrams so I can install this.
I will owe a favor to someone!!
engine and powertrain management diagrams so I can install this.
I will owe a favor to someone!!
#2
You jerk. Why do you have a 2000 motor?! ...and why don't I have one too?! Seriously though, how'd you hook that up? Does that have the updated vacuum system that does away with the dreaded "rats nest"?
Much props for landing that tho...you'll be the envy of everyone except 20b owners
Much props for landing that tho...you'll be the envy of everyone except 20b owners
#3
Senior Member
Join Date: Mar 2001
Location: Roaring Spring, PA USA
Posts: 524
Likes: 0
Received 2 Likes
on
2 Posts
Jesse Lau is in Japan and is always selling used RX7 parts from over there. I bought a set of rear leather seats for my 93RX7. Send him an email and make sure you put in the email title NEED HELP and request how much it would be for him to get you a copy of the wiring diagram. Chances are, he would probably have to go to the Japan dealer and buy one for you.
Good Luck
Tim McCreary
Good Luck
Tim McCreary
#5
Eats, Sleeps, Dreams Rotary
iTrader: (2)
If you only have the enigne wiring harness that's attached to the motor, you only get half of the wiring harness. The other half is inside the car and I hope you got that as well. Even if you do, you will have a big headache swapping out the wires inside the car. I think you should just go haltec. Also, I hope they didn't change the wiring for the tranny. On motor part of the wiring harness, there is one bundle that goes to the tranny. I hope those didn't change or you will have another headache trying to wire the tranny. Have you taken out your old motor yet? Try to see if the engine part of the wiring harness will hook up with the ones inside the car. If not, go haltec.
Chuck
Chuck
#6
Senior Member
Join Date: Mar 2001
Location: Roaring Spring, PA USA
Posts: 524
Likes: 0
Received 2 Likes
on
2 Posts
http://www.geocities.com/laujesse/
laujesse@yahoo.com
He currently has a set of 1999 RX7 Rims for sale.
Tim
laujesse@yahoo.com
He currently has a set of 1999 RX7 Rims for sale.
Tim
Thread
Thread Starter
Forum
Replies
Last Post