3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

2 ?'s please help!

Thread Tools
 
Search this Thread
 
Old Jul 29, 2004 | 08:04 PM
  #1  
FastCat17's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 242
Likes: 0
From: La Junta, Colorado
2 ?'s please help!

I just wanted to ask you guys who sells the apexi power fc commander holder? i think it was pettitracing.com but i can't find it on there and i know someone sells it. and just a little ? i accidtenally got a vaccum hose and the wire to my o2 sensor pinched in between my transmission and engine. and i cant get them out so am i going to have to pull the engine just to be safe or cani just get them out by losening some of the bellhousing bolts? and without taking the transmission out? thanks alot ! peace!
Reply
Old Jul 29, 2004 | 08:23 PM
  #2  
tookwik's Avatar
VIP - Very Irish Person
Tenured Member 10 Years
 
Joined: Jan 2002
Posts: 1,458
Likes: 0
From: NC State
wow, well as for the pfc holder... gothamracing.com has them.

and for the pinching the wire and hose between the engine and tranny... You might be better off just leaving them there and running new lines, although I would hate to see the consequences of it getting entangled up in the internals of your transmission. If you can, loosen it up then take it out. But if not, i guess you could do what I first said. I would get more opinions on that one first.
Reply
Old Jul 29, 2004 | 08:31 PM
  #3  
FastCat17's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 242
Likes: 0
From: La Junta, Colorado
Allright thanks!
Reply
Old Jul 29, 2004 | 08:39 PM
  #4  
littlemilla3's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2004
Posts: 489
Likes: 1
From: Brea, CA
I don't see why you couldn't just loosen the bellhousing bolts ang pull them out, unless more stuff dropped in there...
Reply
Old Jul 29, 2004 | 10:05 PM
  #5  
bee's Avatar
bee
Senior Member
Tenured Member 05 Years
 
Joined: May 2002
Posts: 494
Likes: 0
From: Austin Tx
You don't have to pull the motor?? Even if you left your shoe in there, you could just seperate the tranny and motor wile both were still in the car. Just losen the bolts and pull them out.
Reply




All times are GMT -5. The time now is 07:33 AM.