1993 Mazda rx7 Auto to manual swap question
09-11-18, 09:20 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Location: FL
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
1993 Mazda rx7 Auto to manual swap question
Hello everyone i just recently became owner of a 1993 Rx-7 i am doing a auto to manual swap i know their is a write up on here but there are still some questions and concerns i still have one is that my transmission that i bought has that plug or connector but i was cut so i have just two small pig tail out but what is that i know their is another one what do those things do i been trying to look for them in manuals but know luck i apologize i don't know whats the technical term for it im new to the FD never worked on one so im just trying to learn more about it and second thing is when i bough the transmission the guy i bought it off from told me that the PPf for auto and manual are the same i dont know if its true if anyone can clear these questions for me i would really really appreciate it. thanks in advance.
09-11-18, 10:01 AM
#2
IIRC there should be pig-tails for the 1-2 switch, reverse switch (back-up lights) and the neutral switch on the transmission....plus the odometer. Never involved with a swap. Not sure about harness differences but this should help....
https://www.rx7club.com/3rd-generati...guide-1129705/
https://www.rx7club.com/3rd-generati...guide-1129705/
Last edited by Sgtblue; 09-11-18 at 10:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Rookie84
3rd Generation Specific (1993-2002)
6
08-02-08 12:24 AM
marlaman
2nd Generation Specific (1986-1992)
3
06-24-04 05:59 AM
Rx-7pl
3rd Generation Specific (1993-2002)
3
05-30-04 09:09 AM