^^^ I am stumped on that one too... Maybe headlight washer or something?

 

i love you guys

 

 

Can someone please post the wiring diagram for the harness(s) that plugs into the ECU? I have a 93 base if that matters. Thanks!

 

Wiring diagram can be downloaded from the first link in the first post of this thread.
Wastegate solenoid wiring (referenced in the new thread you created) is on pg Z-32 of the 1994 diagram (pg. 35 of the PDF).

 

Job well done..

 

ok so i looked at a lot of threads here and i have not really got a solid answer on how to connect the X-05 connector fom a JDM harness to a US harness. please help
thanks

 

This is great, thank you!

 

Take those gullwing doors off the RX-7 and I'll tell you how.

 

Very cool thread, nice work.

The X-11 connecter seems to be missing however, I can't seem to find it in the photos.

 

Awesome this will help out. I just started my front body harness simplification. Im also wanting to put my relays and fuses in the rear bins. I only want my lights and necessary plugs to go forward.

 

Thanks. Yes, X-11 was deleted by a previous owner and I hadn't gotten into the wiring enough to notice when I first put together this thread. Since then I've found the mistake and have fixed it on other forums where I'm allowed to edit threads, but for this forum, I can't really do anything about it except say it's supposed to be right beside X-12. On the same branch actually

Thanks again guys

Lane

 

I am not sure if anyone noticed, but the picture showing all 4 section of the harness is missing one more connector. It is within section 4 circled in red. Does anyone know where this connector connects to?



here's a picture of only section 4, but missing that blue connector.



-AzEKnightz

 

i put this together for anyone like me needing to check electrical problems..

 

Thank you, that's very helpful!

-AzEKnightz

 

Win

 

Good catch. I had to go and rummage through my discarded wiring box to see what that connector was. It's actually a mini harness that connects X-05 from the Front harness to the Emission harness. It's not in the picture but it is a two short straight shot harness with two blue ends. One male and one female. I think the male end plugs into the blue X-05 end in the picture and the female end plugs into the male blue X-05 on the emission harness.

Hope that helps.

BTW - This thread is now outdated. The more complete version is here:

https://www.rx7club.com/3rd-generati...index*-971065/

I posted something nice in post #24 too

Lane

 

Awesome, thank you!

 

Is the battery harness decently right? The ring terminal next to the double starter one, you have it down as a ground below fuse box but sure that the positive feed from the alternator?

 

Hey guys does anyone know where this attaches to??

 

Given where it is in the picture and the orientation of the lug, I'm pretty sure that wire bolts up to the output side of the 120A main fuse in the fuse box (the one with the positive battery terminal attached). If I'm correct, if you follow that wire to its other end, it will terminate in that other fuse/relay box in the picture that has the EGI Relay. When you remove the plastic cover of the fuse box, on the side opposite the battery terminal where the 120A fuse lies, you should see a threaded M6x1.0 hole for you to bolt that lug into. If you're lucky, the M6 bolt will still be there, otherwise you should be able to get one at a local hardware store.

Please confirm all of the above by consulting the FSM wiring diagram first before messing with it - I'm not liable if you inadvertently turn your FD into a car-b-q. There are links to download the FSM wiring diagrams posted on this site.

 

Thank you Pete_89t2
i had a friend send me a pic of where the wire attaches to