Hello, i purchased a rx7store 1600cc high impedance injectors, and i was wondering which one of the two wires on the stock injector plug do i use the resisters on. There is a larger and a smaller wire to each injector. And second am i suppose to put the resistors in a parallel or series application. thanks for your help.

 

I didnt know they sold 1600 cc high impedance injecters. I would contact the rx7 store for info!

 

It's been a while since I did mine, but I believe they are low impedance injectors and the resistor need to be in series with the injector to make it "high impedance".

 

x2 and it does not matter witch two wires go to the injector as long as you have the right pair in the right place.