13B S7 Idling on one rotor
#1
Full Member
Thread Starter
Join Date: Dec 2012
Location: New Zealand
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
13B S7 Idling on one rotor
Hey guys,
Some may know already I have swapped a 13B out of a series 7 FD into my Mazda MX5. Now I have a problem of it idling and driving on one rotor. The front rotor is working perfectly fine with the rear being dead and fouling up the plugs. I have good spark (brand new plugs), working second hand coil packs I removed from a running FD with good condition factory spark plug leads, ECU is tuned (Megasquirt) and checked the compression wit 100psi across all 3 faces of each rotor. What am I missing out on testing or fixing please?
Thank you
Ash
Some may know already I have swapped a 13B out of a series 7 FD into my Mazda MX5. Now I have a problem of it idling and driving on one rotor. The front rotor is working perfectly fine with the rear being dead and fouling up the plugs. I have good spark (brand new plugs), working second hand coil packs I removed from a running FD with good condition factory spark plug leads, ECU is tuned (Megasquirt) and checked the compression wit 100psi across all 3 faces of each rotor. What am I missing out on testing or fixing please?
Thank you
Ash
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM
cdn
2nd Generation Non-Technical and pictures
0
08-11-15 08:59 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM