rtlyons

I am swaping a 13b-rew into my fb. I am down to the wiring and I am lost. I have never worked on a 3rd gen befor so all the help i can get would be greatly appreciated. The motor i bought came with an uncut wiring harness and all the sensors on the motor and trans. (hamanual by the way) I have looked on mitchell and alldata and have found nothing but unhelpfull info. I ve no ignitor yet and i think i dont even know have the harness for it. The connectors that I have no clue to were they go is as follows: blue 12pin, white 14pin, orange 12pin,orange4 pin. it would be nice to know where all these go! I have my ecu and i only have the the two yellow connectors closest to the right side of the ecu. I am curious as to what the 2 open spaces on the left are for. yellow 12pin and a yellow 22pin. All I need to know is what i need to buy and hook up in order to get this motor running and also what i am missing. my second ? is how to run power to my ecu. Call me a newb or whatever but i have never worked on a 3rd gen before or even looked under the hood of one. Any help and advice in which you guys can give we will help out alot