12 lbs on stock turbo. is it safe????
#1
Rotary Enthusiast
Thread Starter
Join Date: Jun 2001
Location: Mont-Laurier , quebec
Posts: 815
Likes: 0
Received 0 Likes
on
0 Posts
12 lbs on stock turbo. is it safe????
Greetings,
Just want top be safe here . Is is ok to run 12 lbs on
stock turbo without an ECU. I think not but wants some
advice.
Thanks.
Serge
Just want top be safe here . Is is ok to run 12 lbs on
stock turbo without an ECU. I think not but wants some
advice.
Thanks.
Serge
#2
OG
might not be overly bad for the turbo..but you are coming close the max injector duty cycle for the stock injectors....the real issue is getting enough fuel...and avoiding fuel cut
#3
Rotary Freak
12 PSI is safe for the turbos, but you need to worry about the fuel at that point. I don't think the injectors maax out until about 14 PSI. But you donm't want them maxed out in the first place.
I think fuel cut on the stock ECU is ~11.8 PSI or something arond there, depending on RPM.
I think fuel cut on the stock ECU is ~11.8 PSI or something arond there, depending on RPM.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM