primerGrey

iTrader: (13)

This is from my R1 throttle body. Over the years three have rolled away never to be seen again. It is easy to find chromed acorns but not with the crown.

EUROX

iTrader: (15)

The junkyard? You could also hit up Lowes.

Monkman33

iTrader: (28)

I use stainless cap nuts/acorn nuts with stainless washers.

However, a little digging for flanged chrome m6 cap nut:

https://www.akr-performance.com/c/to...bles/fasteners

So I am sure there are more options out there.

gracer7-rx7

iTrader: (16)

I've seen them referred to as cap nuts or acorn cap nuts. I can't find any that have a flange but here are some non flanged:
https://www.boltdepot.com/Metric_cap...8.8_steel.aspx


Also, hardware store (ACE, OSH) have non flanged that match the thread pitch but I think use an 11mm wrench.

primerGrey

iTrader: (13)

Thanks all.

Monkman, thanks for the terminology help. Searching for "chrome flanged cap nut M6" turned up (after very significant digging - these things really are rare):

Kawasaki 92015-1385 NUT,CAP,6MM

and

Honda 90201-415-000 NUT, CAP (6MM)

I bought the Kawasaki. It looks like chrome in the picture. We will see.

GoodfellaFD3S

iTrader: (213)

Keep us updated, I'm curious to see how they look. What was the pricing, like five bucks each?

Gilgamesh

go here:

Allensfasteners.com has a ton of stuff, here is the direct link

All Keywords: acorn


M6x1.00 10mm hex

SoINFD

iTrader: (2)

https://www.atkinsrotary.com/store/9...tegory_id=1721
I got three here since I needed some for the UIM...

primerGrey

iTrader: (13)

Thanks. Unless I'm missing something, those are acorn nuts without a flange.

primerGrey

iTrader: (13)

Thanks, those are a great source for flanged cap nuts but I think those are M8's, for the upper-to-lower and the throttle-body to upper. Also, they don't appear to be chromed.

I was looking for the M6 nuts that attach the intake pipe to the throttle body.

Looking for all of these in one nut:
M6
Acorn (a.k.a. "cap")
Chrome
Flange (a.k.a. "crown")

primerGrey

iTrader: (13)

Will do. The ebay site I bought the Kawasaki nuts from had a bag for $2.50, and shipping of $2.50. I can't tell how many are in the bag - at least two though. So I bought two bags. They are coming from New Jersey, so maybe near you somewhere.

Seems like motorcycles are the only application where these get used even semi-regularly. Sort of makes sense.

primerGrey

iTrader: (13)

My mistake, the $2.50 is per nut, not a bag. On the plus side, they are chromed, per this photo. Looks like a good replacement.

gracer7-rx7

iTrader: (16)

Mazdatrix lists them too. almost $5 a nut
Throttle, Carb and Choke Parts
scroll down

primerGrey

iTrader: (13)

Sure enough! Good find, thanks.

Fritz Flynn

iTrader: (263)

I have some good used ones