The official 'My FD3S' picture thread. READ THE RULES!
The following 3 users liked this post by L-Spec:
#9128
Full Member
The following 5 users liked this post by Macer:
AE_Racer (06-03-19),
cr-rex (09-12-19),
Erosangel (08-04-19),
Jesturr (07-01-19),
RE-Amemiya (06-03-19)
#9136
The bomb is in the toy!1!
iTrader: (4)
Hood is from Shine and the fitment is indeed excellent. This is the Carbon Reinforced FRP hood. Two things to worth noting..
1. Where the hood pins are in the photo - the hood sat slightly raised in that area without them. But with the hood pins it's very flush.
2. The diameter of the hood striker was too large for the factory latch. When I test fit the hood, it took some force to get it to latch/close. When I pulled the release cable, the latch released but not all the way and the hood was stuck; I had to slip a screw driver inside the latch and pry the latching bolt off the striker. To fix it, I used my Dremel and a hand file to reduce the diameter of the striker. Closes and opens like a dream now. I doubt my experience is common since I've never read about someone else experiencing the issue and it's anyone's guess how many forum members have bought Shine hoods. But there you have it.
1. Where the hood pins are in the photo - the hood sat slightly raised in that area without them. But with the hood pins it's very flush.
2. The diameter of the hood striker was too large for the factory latch. When I test fit the hood, it took some force to get it to latch/close. When I pulled the release cable, the latch released but not all the way and the hood was stuck; I had to slip a screw driver inside the latch and pry the latching bolt off the striker. To fix it, I used my Dremel and a hand file to reduce the diameter of the striker. Closes and opens like a dream now. I doubt my experience is common since I've never read about someone else experiencing the issue and it's anyone's guess how many forum members have bought Shine hoods. But there you have it.
The following users liked this post:
yusoslo (06-29-19)
The following users liked this post:
Gunnytron (06-22-19)
The following 4 users liked this post by Aristo:
The following 3 users liked this post by wutangben:
The following users liked this post:
Macer (09-23-19)