NEED an ABS SENSOR FL
#1
Full Member
Thread Starter
NEED an ABS SENSOR FL
Hi All,
Quick question.
Is there a replacement front left ABS sensor available for the FD 02.
I managed to kill mine and low and behold they are no longer available from mazda
Quick question.
Is there a replacement front left ABS sensor available for the FD 02.
I managed to kill mine and low and behold they are no longer available from mazda
#5
Rotary Freak
I was expecting Florida!
I wouldn't worry too much about 2002 specific, the Mazda parts interpreter guru on another forum mentioned the latest ones were a supersede and worked with the earlier ABS years ago, despite minor resistance differences. I assume that makes earlier ones forward compatible too.
Our friend in Newie should have some, if you're not too OCD. I have a bag of them somewhere as well, but probably a major challenge to find.
I wouldn't worry too much about 2002 specific, the Mazda parts interpreter guru on another forum mentioned the latest ones were a supersede and worked with the earlier ABS years ago, despite minor resistance differences. I assume that makes earlier ones forward compatible too.
Our friend in Newie should have some, if you're not too OCD. I have a bag of them somewhere as well, but probably a major challenge to find.
#6
Full Member
Thread Starter
I was expecting Florida!
I wouldn't worry too much about 2002 specific, the Mazda parts interpreter guru on another forum mentioned the latest ones were a supersede and worked with the earlier ABS years ago, despite minor resistance differences. I assume that makes earlier ones forward compatible too.
Our friend in Newie should have some, if you're not too OCD. I have a bag of them somewhere as well, but probably a major challenge to find.
I wouldn't worry too much about 2002 specific, the Mazda parts interpreter guru on another forum mentioned the latest ones were a supersede and worked with the earlier ABS years ago, despite minor resistance differences. I assume that makes earlier ones forward compatible too.
Our friend in Newie should have some, if you're not too OCD. I have a bag of them somewhere as well, but probably a major challenge to find.
.
I haven't had any luck finding any at all.
Neither left or right , early or late.
I thought I had found a new one but that fell through.
happy to take what I can find at this point.
#7
Full Member
Thread Starter
Trending Topics
#9
Full Member
Thread Starter
and yes, I presume I would get the cable attached to the cable. I think I should be able to use any brackets but not sure about rears fitting the fronts. Preferr not to have to modify things to fit if I dont have to
#10
Rotary Freak
Found them, a couple of FD04-43-73X and three of 70X. I assume you've done suspension work and haven't released the sensor from the upright, but if it's the other end that's broken, all might not be lost. People have hacked into the ABS shielded cable to run traction control successfully - have some saved connector ends too.
The following 2 users liked this post by billyboy:
Blackduck30 (10-04-23),
j9fd3s (10-04-23)
#11
Full Member
Thread Starter
Found them, a couple of FD04-43-73X and three of 70X. I assume you've done suspension work and haven't released the sensor from the upright, but if it's the other end that's broken, all might not be lost. People have hacked into the ABS shielded cable to run traction control successfully - have some saved connector ends too.
.
Your a legend
I was doing some work in the wheel well and knocked the sensor and it cracked and broke.
How much would you like for the 73X and also postage to Au if thats ok
#12
Eats, Sleeps, Dreams Rotary
iTrader: (283)
pic of rear ABS sensor on post #10:
https://www.rx7club.com/market/1163616#post12578375
1. 30" long...and harness connector and metal UCA bracket from front required for fitment.
2. USPS small flat rate box to AU is $45
Jim T
https://www.rx7club.com/market/1163616#post12578375
1. 30" long...and harness connector and metal UCA bracket from front required for fitment.
2. USPS small flat rate box to AU is $45
Jim T
#14
Full Member
Thread Starter
pic of rear ABS sensor on post #10:
https://www.rx7club.com/market/1163616#post12578375
1. 30" long...and harness connector and metal UCA bracket from front required for fitment.
2. USPS small flat rate box to AU is $45
Jim T
https://www.rx7club.com/market/1163616#post12578375
1. 30" long...and harness connector and metal UCA bracket from front required for fitment.
2. USPS small flat rate box to AU is $45
Jim T
Hey Jim,
Sorry for the late reply.
Im not sure the rear sensor will work as the fronts have a longer protrusion extending out that totally covers the top of the ABS ring.
The rear seems to be very short and im not confident it will contact the ring suffiently to pick up a pulse.
Regards
Jamie
The following users liked this post:
JiteshTII (10-07-23)