FD RARE PARTS (rare defined)
11-06-15, 12:58 PM
#852
Junior Member
Thanks!
Yup it's the stock leather seats, covered in custom "Wet Okole" seat covers: Car Seat Covers | Seat Covers | Custom Seat Covers | Truck Seat Covers | Automotive Seat Covers
From outside the car they look like the RZ Recaro buckets, and since my surfboard rides shotgun...
Yup it's the stock leather seats, covered in custom "Wet Okole" seat covers: Car Seat Covers | Seat Covers | Custom Seat Covers | Truck Seat Covers | Automotive Seat Covers
From outside the car they look like the RZ Recaro buckets, and since my surfboard rides shotgun...
11-07-15, 11:39 AM
#853
Thanks!
Yup it's the stock leather seats, covered in custom "Wet Okole" seat covers: Car Seat Covers | Seat Covers | Custom Seat Covers | Truck Seat Covers | Automotive Seat Covers
From outside the car they look like the RZ Recaro buckets, and since my surfboard rides shotgun...
Yup it's the stock leather seats, covered in custom "Wet Okole" seat covers: Car Seat Covers | Seat Covers | Custom Seat Covers | Truck Seat Covers | Automotive Seat Covers
From outside the car they look like the RZ Recaro buckets, and since my surfboard rides shotgun...
11-08-15, 11:24 AM
#856
Junior Member
They'll do a "custom logo" for you (including Bride), in fact they'v already got a few in the catalogue.
I actually gave em a pic of the RZ seats and said.."make em' look like that..." & they did.
Ha.
I actually gave em a pic of the RZ seats and said.."make em' look like that..." & they did.
Ha.
11-12-15, 10:20 AM
#863
Junior Member
NICE! I just ordered the RE Tail light finishers as well (from RHDJapan), along with a RE wet carbon hood ($2500 usd shipped to Hawaii)
...there are def. worse ways to burn thru $2.5k
I'm curious to know the fitment. My Esprit tail light cover snaps on with no adhesive needed, but doesn't sit perfectly flush on the corners. The RE finisher seems to sit flush, but I'v heard it needs 3M to mount.
post some pics when you get her on!
...there are def. worse ways to burn thru $2.5k
I'm curious to know the fitment. My Esprit tail light cover snaps on with no adhesive needed, but doesn't sit perfectly flush on the corners. The RE finisher seems to sit flush, but I'v heard it needs 3M to mount.
post some pics when you get her on!
11-12-15, 12:56 PM
#864
lol!
Will do! Yeah I will admit the $$ stung a bit. If it isn't performace related aka fun factor it hurts more.
NICE! I just ordered the RE Tail light finishers as well (from RHDJapan), along with a RE wet carbon hood ($2500 usd shipped to Hawaii)
...there are def. worse ways to burn thru $2.5k
I'm curious to know the fitment. My Esprit tail light cover snaps on with no adhesive needed, but doesn't sit perfectly flush on the corners. The RE finisher seems to sit flush, but I'v heard it needs 3M to mount.
post some pics when you get her on!
...there are def. worse ways to burn thru $2.5k
I'm curious to know the fitment. My Esprit tail light cover snaps on with no adhesive needed, but doesn't sit perfectly flush on the corners. The RE finisher seems to sit flush, but I'v heard it needs 3M to mount.
post some pics when you get her on!
11-13-15, 06:34 PM
#865
Senior Member
iTrader: (2)
XS-Engineering Intercooler, Eurou 99-Spec front bumper and lip, East Bear aero mirrors, R-Magic 99-Spec oil-cooler ducts, Vorschlag side skirts and rear bumper w/carbon diffuser
Last edited by LO7; 11-13-15 at 06:53 PM.
11-14-15, 03:21 PM
#867
Senior Member
iTrader: (2)
The corners of the kit come down farther and curve around the wheel wells more than most, and go straight down from the widest planes on the stock body- which is perfect for integrating the wider / larger 20" WORK S1-2P's I'll be using. The Eurou front lip has the same sharp corners at the bottom of the wheel wells so I think it'll be a clean transition.
The Eurou fenders will be modded into a pseudo +20mm Rocketbunny-esque style (*pic posted here: Wheel Fitment / Fender preview)
Last edited by LO7; 11-14-15 at 03:51 PM.
11-18-15, 09:53 PM
#870
Been piecing together my Panspeed kit for the past few months now. Getting ready to order the side skirts and then finish it off with the hood. Can't wait to get this all put on.
[IMG]https://cimg4.ibsrv.net/gimg/www.rx7club.com-vbulletin/2000x1124/80-20150727_223825_dc5252efcae5642120598f16f8a78a563f 806956.jpg[/MG]
[IMG]https://cimg6.ibsrv.net/gimg/www.rx7club.com-vbulletin/1080x1080/80-img_20151021_104723_52c0f2b02d7bc663e19ae65c9a3c33 b0efaf0d89.jpg[/MG]
[IMG]https://cimg4.ibsrv.net/gimg/www.rx7club.com-vbulletin/2000x1124/80-20150727_223825_dc5252efcae5642120598f16f8a78a563f 806956.jpg[/MG]
[IMG]https://cimg6.ibsrv.net/gimg/www.rx7club.com-vbulletin/1080x1080/80-img_20151021_104723_52c0f2b02d7bc663e19ae65c9a3c33 b0efaf0d89.jpg[/MG]
NIIIIIIIIIIICE!!!
How much did the fenders ended up costing you? I forgot i have a set of those but without the bottom insert/add on thing, till i saw yours
11-18-15, 10:38 PM
#871
Thanks haha. I bought the front fenders from Japanparts.com and I think I ended up paying just a little over a grand for them and having a 4 week waiting period. I've been jumping back and forth between RHDJapan and Japanparts as far as buying my kit because some items are cheaper on one site versus the other. I also had to request to have the bumper added to both of their websites and ended up purchasing it through RHDJapan.
11-19-15, 11:56 AM
#872
Junior Member
Thanks haha. I bought the front fenders from Japanparts.com and I think I ended up paying just a little over a grand for them and having a 4 week waiting period. I've been jumping back and forth between RHDJapan and Japanparts as far as buying my kit because some items are cheaper on one site versus the other. I also had to request to have the bumper added to both of their websites and ended up purchasing it through RHDJapan.
11-19-15, 12:44 PM
#874
Full Member
iTrader: (3)
Join Date: Jan 2014
Location: California
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Recently obtain MS carbon shift **** and ebrake handle.
Anyone have any advise on the install? The **** doesn't quite reach the top of the shift boot and it doesn't thread in to firmly.
And whats the best way to get the ebrake handle on? The box also came w/ a piece of some sort of fabric and an epoxy of sorts.
Anyone have any advise on the install? The **** doesn't quite reach the top of the shift boot and it doesn't thread in to firmly.
And whats the best way to get the ebrake handle on? The box also came w/ a piece of some sort of fabric and an epoxy of sorts.
11-19-15, 01:29 PM
#875
Recently obtain MS carbon shift **** and ebrake handle.
Anyone have any advise on the install? The **** doesn't quite reach the top of the shift boot and it doesn't thread in to firmly.
And whats the best way to get the ebrake handle on? The box also came w/ a piece of some sort of fabric and an epoxy of sorts.
Anyone have any advise on the install? The **** doesn't quite reach the top of the shift boot and it doesn't thread in to firmly.
And whats the best way to get the ebrake handle on? The box also came w/ a piece of some sort of fabric and an epoxy of sorts.
May have to chop your existing ebrake handle off in half to get it removed.