Where are the primarys ?
Senior Member
Joined: Feb 2001
Posts: 302
Likes: 0
From: Inwood, Long Island
They're all the way "down there". To get at them you'll have to remove practically everything that's under the UIM(solenoids, hoses, rack, connectors, acv, etc). It's a very time consuming job and you should be very careful when disconnecting all those hoses, otherwise the consequences are obvious. Be careful when pulling them out cause they're probably stuck in there real hard. They easliy break!!(Don't ask how I know).
It's never fast enough...
Joined: Feb 2001
Posts: 3,760
Likes: 3
From: Miami - Given 1st place as the POOREST city in the US as per the federal government
The primaries are on the primary fuel block 
When you finally get the primary fuel block out, twist them back and forth and pull them at the same time. They will slowly start to come out. Don't get impatient. If you have to, try to put a little 2 cycle oil into the O-rings.
When you finally get the primary fuel block out, twist them back and forth and pull them at the same time. They will slowly start to come out. Don't get impatient. If you have to, try to put a little 2 cycle oil into the O-rings.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM