Vented BOV...No Noise?
#1
Rotary Freak
Thread Starter
Join Date: Aug 2001
Location: maryland
Posts: 1,734
Likes: 0
Received 0 Likes
on
0 Posts
Vented BOV...No Noise?
I vented my stock BOV and no noise? I tried the top hose on the left side and then I tried the bottom hose on the left side. What the hell is going on? I thought it was supposed to be real loud. Any help would be greatly appreciated.
#4
Rotary Freak
Thread Starter
Join Date: Aug 2001
Location: maryland
Posts: 1,734
Likes: 0
Received 0 Likes
on
0 Posts
I don't have a boost gauge yet but I KNOW I have boost. Proof to this is that I f**ked up a porsche carrera the other night and also an older ford lightning. Am I using the right hose? The 2 on the left side of the airbox but venting the top one...right? One goes into the middke of the y pipe and the other goes to the back of the intake I believe(can't remember, not looking at it). Any ideas?
#5
SEMI-PRO
iTrader: (2)
Well if you took off the right hose you will defanitly hear it. From the passenger side of the car looking at the airbox its the seond hose down from the top. If you follow that hose back a few inches you will see a brown flying soucer looking thing. Thats your blow off valve. If this is the one you vented into the atmosphere you sould hear it LOUD when you let off from high boost.
Thread
Thread Starter
Forum
Replies
Last Post
Linda_Lovelace
General Rotary Tech Support
0
09-18-15 10:04 PM