My first time at the drag strip.!!!!
#1
My first time at the drag strip.!!!!
Hey guys ..
friday night i finally had the chance to take my rex and see what it runs at the 1/4 mile... well here it is..
R/T .742
60' 2.0
330 5.706
1/8 8.821
MPH 80.95
1000 11.469
1/4 13.6
MPH 105.76
heres my mods..
1. APEXI F.M.I.C.
2. APEXI AVC-R B.C.
3. APEXI N1 CATBACK E.
4. APEXI POWER INTAKES.
5. HKS DOWNPIPE.
6. ATR MIDPIPE.
i was runnin only 9 pounds of boost...since i dont have an ecu. upgrade yet and didnt want to blow anything..=(
i had NITTO'S 555 power extreme...in the rear...with my stock wheels....
im gettin my power fc... this week and i'll be turning up my boost to about 14 psi.. and see what i can get next time...im gonna be running my car at the import shootout here in Salt Lake City..on september 14..so hope i can do some good driving on that day...
wish me luck!!!!!!!!!!
thx.
Alx-7
friday night i finally had the chance to take my rex and see what it runs at the 1/4 mile... well here it is..
R/T .742
60' 2.0
330 5.706
1/8 8.821
MPH 80.95
1000 11.469
1/4 13.6
MPH 105.76
heres my mods..
1. APEXI F.M.I.C.
2. APEXI AVC-R B.C.
3. APEXI N1 CATBACK E.
4. APEXI POWER INTAKES.
5. HKS DOWNPIPE.
6. ATR MIDPIPE.
i was runnin only 9 pounds of boost...since i dont have an ecu. upgrade yet and didnt want to blow anything..=(
i had NITTO'S 555 power extreme...in the rear...with my stock wheels....
im gettin my power fc... this week and i'll be turning up my boost to about 14 psi.. and see what i can get next time...im gonna be running my car at the import shootout here in Salt Lake City..on september 14..so hope i can do some good driving on that day...
wish me luck!!!!!!!!!!
thx.
Alx-7
#3
Bigger and better things
How the hell are you doing that ? ****....
with those mods you should be leaner than i can imagine!
The dp and fmic would do it.. but MP AND DP AND INTAKE AND FMIC is just asking for ****!!!
Watch your ***.... sounds like your going motor shopping very soon if you dont!
with those mods you should be leaner than i can imagine!
The dp and fmic would do it.. but MP AND DP AND INTAKE AND FMIC is just asking for ****!!!
Watch your ***.... sounds like your going motor shopping very soon if you dont!
#4
Original Gangster/Rotary!
iTrader: (213)
Originally posted by Want2race
How the hell are you doing that ? ****....
with those mods you should be leaner than i can imagine!
The dp and fmic would do it.. but MP AND DP AND INTAKE AND FMIC is just asking for ****!!!
Watch your ***.... sounds like your going motor shopping very soon if you dont!
How the hell are you doing that ? ****....
with those mods you should be leaner than i can imagine!
The dp and fmic would do it.. but MP AND DP AND INTAKE AND FMIC is just asking for ****!!!
Watch your ***.... sounds like your going motor shopping very soon if you dont!
Thread
Thread Starter
Forum
Replies
Last Post
Claudio RX-7
Haltech Forum
5
04-23-19 02:50 PM
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM