Hey everyone, i would like to know how many of you guys have hks turbo timer type 1, i would have a question to ask you.

thanks a lot

puma

 

I have one, but never finished installing it. =)

I attached it to my existing GReddy harness, and pluged the Rev and Speed wires in, but only the rev one works, and since I ran out of splice connectors I never bothered to fix it.

 

well, i though that more people had that turbo timer.

Anyway, if you have it installed even if it is at half, i would like you to give me the reading you have for the volt meter. When i start the car, i have around 14 V but it gradually goes down to 12.8, at that point, my A/F ratio don't work anymore. It really moves with the voltage of the system. Could you tell me what are the readings you have at different stage of running the car.

thanks a lot

puma

 

I got one last week but haven't hooked iiit all the way up yet i'm finishing it tomarrow and I'll let you know.

 

I've got mine hooked up. Except, I haven't bothered with rev and speed splices yet. Time is hard to come by with work and school, and a g/f! I'll be hooking up the wires tommorrow probably.
-Pete

 

I have one and never finished hooking it up. But as far as my voltage, it is usually in the low 14's then drops to mid-high 13's but never 12.

 

I just got mine all hooked up I'm seeing a constant voltage of 13.65-13.80 while driving and at idle. The speed sensor seems to read ~3 Km/h in comparison to my Power FC though. hope this helps.

 

Does the HKS type 1 work all function with FD?