Yet another Prelude CAI question
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Connecticut
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Yet another Prelude CAI question
The Prelude cold air intake does come in either one piece or two rite? Well I was just wondering if it would be better getting the one piece so I can cut it ANY where I need or the two piece thats already cut and might not be cut in the exact rite place I need it cut.
#2
Junior Member
Join Date: Aug 2004
Location: Rockford, IL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
I got a 1 peice off of ebay and cut it myself. It was pretty easy. Just keep in mind where u're going to have your mass airflow sensor sit because it won't be perfect. Well mine wasn't anyways. Mine kinda sat up in an angle. I went to ACE hardware and bought 2 big 3 inch couplers and it all went together just fine.
#3
XBL** Ownicus
iTrader: (2)
Join Date: Mar 2004
Location: St. Paul, Minnnesota
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
I used the one piece as well. You just have to cut it properly and use those rubber 3" couplers. Since then I've switched to a cold air box instead. The AFM remains level, it's cheaper, works just as well, and easier to put together IMO.
Oh yeah, don't even think of using that horrible air filter with your FC, the one that comes with the kit is horrible. Get a good Apex'i filter (the 75mm w/universal flange fits well and can be had for a decent price on eBay.)
Oh yeah, don't even think of using that horrible air filter with your FC, the one that comes with the kit is horrible. Get a good Apex'i filter (the 75mm w/universal flange fits well and can be had for a decent price on eBay.)
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM