2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Yes i have searched....Car Dying. (and another)

Thread Tools
 
Search this Thread
 
Old 04-13-05, 11:35 PM
  #1  
Junior Member

Thread Starter
 
canaduh's Avatar
 
Join Date: Feb 2005
Location: Canada
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Yes i have searched....Car Dying. (and another)

Okay, It's a 1990 TII Rx-7, And i have 3 questions!
1. When i cold start it, it idles around 1500, like regular, then once warm, sits at around 900. And bounces 100 either way, Then when driving, rpms drop dangerously low or car stalls when placed in neutral or clutch pressed, unless there under 1000rpm, then it idles fine.

2. Under hard acceleration there is a loud rattling coming from the passenger side engine bay. Loud from the inside of the car, im sure just as loud outside. Its sort of like a squeaking rattle, very weird.

Any help would be greatly appreciated!
Old 04-13-05, 11:43 PM
  #2  
Rotary Enthusiast

 
LookThatsMe's Avatar
 
Join Date: Apr 2004
Location: NJ
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
you goit a Bov on it? same thing happend to my friend it would die cause it was relasing to much air and the afm would read it correctly and it would result in less air more fuel and teh motor would flood
Old 04-13-05, 11:44 PM
  #3  
slowmotion

 
MDD0101's Avatar
 
Join Date: May 2004
Location: Hamden, Ct
Posts: 955
Likes: 0
Received 0 Likes on 0 Posts
have u had the compression checked
Old 04-13-05, 11:49 PM
  #4  
Junior Member

Thread Starter
 
canaduh's Avatar
 
Join Date: Feb 2005
Location: Canada
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
The motor has just been rebuilt, the compression is fine, and yes there is a BOV. I also have a PowerFC In the car, it's from Japan, and its converted for the FC if that helps at all.

EDIT- I have an HKS ssqv BOV? I think thats what its called. Anyways, is there a way to set it or soemthing maybe?

Last edited by canaduh; 04-13-05 at 11:52 PM.
Old 04-14-05, 10:12 AM
  #5  
Junior Member

Thread Starter
 
canaduh's Avatar
 
Join Date: Feb 2005
Location: Canada
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Anyone else help? If its the BOV thats doing it, what do i do to make it stop dying?
Old 04-14-05, 12:14 PM
  #6  
Full Member

 
nismorx7's Avatar
 
Join Date: Mar 2005
Location: Canada
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
ok heres the update, i tried adjusting the bov...it did nothing. Even if its parked and u rev it it will not grab idle again, it simply falls to 0....
Old 04-14-05, 12:17 PM
  #7  
Dj Pacman

 
djpacman's Avatar
 
Join Date: Aug 2004
Location: Michigan
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Is your exaust in one peice? might need to replace these cars are very dependent on back pressure
Old 04-14-05, 12:34 PM
  #8  
Full Member

 
nismorx7's Avatar
 
Join Date: Mar 2005
Location: Canada
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Hmm that might be it! I have an exhuast leak somewhere around the manifold, but i didnt realize it would cause these kind of symtoms...... Its a full RB exhaust, with trust wastegate that bleeds to the atmosphere. (11psi spring) and the wastegate lines are not hooked up so it wont boost. If that makes a difference...

Last edited by nismorx7; 04-14-05 at 12:42 PM.
Old 04-14-05, 01:17 PM
  #9  
very sleepy!!

 
TitosToy's Avatar
 
Join Date: Jan 2005
Location: Tampa, FL
Posts: 1,052
Likes: 0
Received 0 Likes on 0 Posts
have you check for vac leaks?
Old 04-14-05, 01:36 PM
  #10  
Dj Pacman

 
djpacman's Avatar
 
Join Date: Aug 2004
Location: Michigan
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
It really just depends on the amount a small leak shouldn't affect it that much it was just a thought let me know how it goes
Old 04-14-05, 04:21 PM
  #11  
Full Member

 
nismorx7's Avatar
 
Join Date: Mar 2005
Location: Canada
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Yes I have checked for vacuum leaks, but ill go over it again...thx for the help guys, ill just have to keep guessin.
Old 04-14-05, 10:34 PM
  #12  
Junior Member

Thread Starter
 
canaduh's Avatar
 
Join Date: Feb 2005
Location: Canada
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
i vac leak, unless serioius, would not cause the car to die the way it is, would it?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
3rd Gen Jeremy
3rd Generation Specific (1993-2002)
11
01-15-07 05:16 PM
3rd Gen Jeremy
SE RX-7 Forum
1
01-15-07 05:09 PM
fastyoungone
3rd Generation Specific (1993-2002)
1
01-12-07 08:18 PM
DGblk93
3rd Generation Specific (1993-2002)
6
11-30-06 01:53 PM



Quick Reply: Yes i have searched....Car Dying. (and another)



All times are GMT -5. The time now is 11:53 AM.