woo hoo! another 'won't start' electrical problem.
#1
seven-less
Thread Starter
Join Date: Apr 2003
Location: city of houston.... y0!
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
woo hoo! another 'won't start' electrical problem.
ok... my car hasn't started(tranny probs.) in a month. i have a NEW battery and NEW starter. i tried to start my car for the first time in a month.. so i turn the key half way: everything works. all the lights come on etc... BUT i turn on something like the radio or my head lights and EVERYTHING just tuns back off... then i try to start the engine... NOTHING happens, but sometimes, i hear the starter click a few times. so WTF? could it just be my connections from the battery? my terminals aren't corroded. what about fuses/alternator?
i'm lost and i want to drive my baby again.. i wanna hear her sing again.. and i'm THIS close!
i'm lost and i want to drive my baby again.. i wanna hear her sing again.. and i'm THIS close!
#2
seven-less
Thread Starter
Join Date: Apr 2003
Location: city of houston.... y0!
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
[sarcasm]well, thanks for your help guys[/sarcasm]
but i got it running! ohhhh! the joys of a rotary!!! don't think i'll ever own a piston... hmm, well maybe an e36 M3, or a 300zx convertable w/a TT swap
anyways.. my postitive bat. terminal was corroded pretty bad as well as the wires. so i just poured some warm water w/baking soda on em. it was also very flooded.
[sarcasm]once again, thanks for your patience....[/sarcasm]
but i got it running! ohhhh! the joys of a rotary!!! don't think i'll ever own a piston... hmm, well maybe an e36 M3, or a 300zx convertable w/a TT swap
anyways.. my postitive bat. terminal was corroded pretty bad as well as the wires. so i just poured some warm water w/baking soda on em. it was also very flooded.
[sarcasm]once again, thanks for your patience....[/sarcasm]
#3
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
The basic rule: clean bright shinny metal to metal contact.
Anything less will bite you sooner or later.
A little shot of clear spray enamel after they are cleaned & clamped will protect the connection longer.
Anything less will bite you sooner or later.
A little shot of clear spray enamel after they are cleaned & clamped will protect the connection longer.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM