2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

won't hold idle on cold start

Thread Tools
 
Search this Thread
 
Old 07-02-04, 08:12 AM
  #1  
Still has an RX7.

Thread Starter
iTrader: (1)
 
Enthu's Avatar
 
Join Date: May 2001
Location: minneapolis MN
Posts: 1,015
Received 5 Likes on 5 Posts
won't hold idle on cold start

Like thesubject says, I get no good cold idle.
I gather my recent throttle body swap to one with the secondary butterflies removed has somehting to do with this. I also have no BAC.

It starts up, runs perfect when cold at about 1300 RPM for like 10 seconds, then just stall out completely. I have to hold the throttle to keep it from stalling until it's warmed up the the first mark on the temp gauge. If I let up on the throttle the car wil stall out. once warm the engine idles fine fairly well.

Could this possibly be a vacuum leak? what should I see for InHg at idle with no vacuum leaks?

I'd liek to get the car working without adding back anything I removed. Is there any sensor I should chck to see if it is the cause?

The engine is naturally aspirated.

---
one more odd thing I should mention. Even before doing the TB and removing the BAC, the car woudl run rough for the first few minues at idle, then it woudl smooth out and the idle woudl increse. Almost like a spark plug just wans't firing before and suddenly decided to turn on.

This still occurrs even now.

Last edited by Enthu; 07-02-04 at 08:19 AM.
Old 07-02-04, 09:03 AM
  #2  
Rotary Enthusiast

 
OverDriven's Avatar
 
Join Date: Feb 2002
Location: VA
Posts: 938
Likes: 0
Received 0 Likes on 0 Posts
All you described is a normal result of removing the BAC.

-Joe
Old 07-02-04, 06:22 PM
  #3  
Still has an RX7.

Thread Starter
iTrader: (1)
 
Enthu's Avatar
 
Join Date: May 2001
Location: minneapolis MN
Posts: 1,015
Received 5 Likes on 5 Posts
dammit... alright. I'll try re-installing the BAC.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
stickmantijuana
Microtech
30
04-23-16 06:37 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM



Quick Reply: won't hold idle on cold start



All times are GMT -5. The time now is 09:04 AM.