2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

wont go into 5th

Thread Tools
 
Search this Thread
 
Old Mar 3, 2004 | 10:11 PM
  #1  
DelSlow's Avatar
Thread Starter
Hot Dicken's Cider
Tenured Member 10 Years
iTrader: (2)
 
Joined: May 2003
Posts: 1,428
Likes: 0
From: Marion, Ohio
Question wont go into 5th

I cant shift into 5th for some reason, all other gears work fine, its like theres something blocking 5th gear. i have a mazda racing shortshifter, which i took out and reinstalled, and torqued the bolts down, so i know its not just a loose shifter. id only been driving it for a few hours with the shifter installed(i just got my car put back together). what could the problem be?
Reply
Old Mar 3, 2004 | 10:46 PM
  #2  
WAYNE88N/A's Avatar
Lives on the Forum
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
only thing I can think of (other than an internal shifting fork problem) would be the spring assy thingy inside the shifter tower/ housing (left side)- but I think that might prevent you from going into reverse, too????
Reply
Old Mar 3, 2004 | 10:55 PM
  #3  
trainwreck517's Avatar
Rx-hippie
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 2,076
Likes: 0
From: Torrance CA
If you still got reverse I dout it will be the shift fork, you said you started getting this after you installed your short shifter, maybe you should learn how to shift with a short shifter, although I normally just find reverse to be hard to get into with a short shifter, not 5th.

try putting the stock shifter and see if you can get into fith, you can't but can still get into reverse could be something simple like droped durring shifter installastion and is keeping you from shifting in into fith. But I would check to see if you can get into 5th with a stock shifter.

But if your relize you don't have reverse, could be a shift fork which means rebuild tranny or find a used one.
Reply
Old Mar 4, 2004 | 10:37 AM
  #4  
DelSlow's Avatar
Thread Starter
Hot Dicken's Cider
Tenured Member 10 Years
iTrader: (2)
 
Joined: May 2003
Posts: 1,428
Likes: 0
From: Marion, Ohio
okay, thats good then, because i can shift into reverse fine. it was shifting into 5th fine before with the short shifter though
Reply
Old Mar 4, 2004 | 12:16 PM
  #5  
mali_FC's Avatar
oops......speed bump....
Tenured Member 15 Years
 
Joined: Oct 2003
Posts: 390
Likes: 0
From: los angeles
Smile

well think of it this way...
before you put the short shifter in the fifth gear was kinda far from the third and fourth.
now it's more down to the right than usual.

I had the same problem.
Reply
Old Mar 4, 2004 | 05:59 PM
  #6  
DelSlow's Avatar
Thread Starter
Hot Dicken's Cider
Tenured Member 10 Years
iTrader: (2)
 
Joined: May 2003
Posts: 1,428
Likes: 0
From: Marion, Ohio
i tried reinstalling the stock shifter, but it didnt make a differnce. mali, what turned out to be the problem?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
2
Oct 9, 2015 02:19 AM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM
teebeekay
3rd Generation Specific (1993-2002)
7
Sep 16, 2015 01:54 PM




All times are GMT -5. The time now is 07:13 AM.