Wiring Question
#1
Junior Member
Thread Starter
Join Date: May 2005
Location: Missouri
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Wiring Question
I have a wire that I don't know what it hooks up to.
My car is an 88 TII.
It is a black wire that comes out of a loom on the driver's side near the firewall. It comes out of the loom at the same place as the Oil Temperature Sending Unit's wires. The wire is a black wire with a red stripe that goes to a plastic connector then the wire becomes an all black wire. It has stripped out of something because I can see the copper wire.
Any thoughts are welcome.
thanks
My car is an 88 TII.
It is a black wire that comes out of a loom on the driver's side near the firewall. It comes out of the loom at the same place as the Oil Temperature Sending Unit's wires. The wire is a black wire with a red stripe that goes to a plastic connector then the wire becomes an all black wire. It has stripped out of something because I can see the copper wire.
Any thoughts are welcome.
thanks
#4
Junior Member
Thread Starter
Join Date: May 2005
Location: Missouri
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
No pics. Not at my house right now. Thunderstorm last night=no power today. Thanks AmerenUE!
I did make a mistake earlier. It is not the Oil Temp Sending Unit. The black wire to nowhere is next to the oil LEVEL sending unit that is on the driver's side of the oil pan.
I'll check the ground.
thanks
I did make a mistake earlier. It is not the Oil Temp Sending Unit. The black wire to nowhere is next to the oil LEVEL sending unit that is on the driver's side of the oil pan.
I'll check the ground.
thanks
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM