Wiring Harness 87TII JDM
08-13-03, 12:16 PM
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: NY
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Wiring Harness 87TII JDM
I have 87 NA and bought 87 turbo JDM motor to swap.
The motor is in but my mechanic said wiring harness he got is not matching up. No harness came with the motor and the one ordered is not matching up. I was told there is a gender difference with the 2 motors so what should i do.
Where can i get the harness i need?
Can i use my stock NA harnes and wire it for 87tII jdm motor and how?
The motor is in but my mechanic said wiring harness he got is not matching up. No harness came with the motor and the one ordered is not matching up. I was told there is a gender difference with the 2 motors so what should i do.
Where can i get the harness i need?
Can i use my stock NA harnes and wire it for 87tII jdm motor and how?
08-13-03, 01:14 PM
#2
Senior Member
iTrader: (1)
Join Date: Mar 2002
Location: Carlsbad, CA
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
if the harness is a JSPEC harness, it wont match up because some wires will be longer where they need to be short and vice versa, since the harness comes from the other side of the car, all you need to do is shorten and lengthen the wires accordingly
i had the same problem on my car
i had the same problem on my car
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
