Which wire is it PLEASE!
Thread Starter
Joined: Apr 2003
Posts: 1,711
Likes: 180
From: South Eastern USA
Which wire is it PLEASE!
I've got an 86 n/a. the motor was replaced with an 87' engine and an 87' wiring harness
I am trying to reground the BOOST sensor (passenger shock tower) I have these color wires coming from my wire harness.
Solid black wire, with a thin white stripe and yellow dots
'Thin' solid black wire, with brown dots
Solid brown wire, thin white stripe, with blue dots
Solid brown wire, thin red stripe, with blue dots.
I've heard so many different colors in the past couple of weeks and I DO NOT want to fry my ECU.. please tell me which wire would be the correct wire to ground... thank you very much
-Markus
I am trying to reground the BOOST sensor (passenger shock tower) I have these color wires coming from my wire harness.
Solid black wire, with a thin white stripe and yellow dots
'Thin' solid black wire, with brown dots
Solid brown wire, thin white stripe, with blue dots
Solid brown wire, thin red stripe, with blue dots.
I've heard so many different colors in the past couple of weeks and I DO NOT want to fry my ECU.. please tell me which wire would be the correct wire to ground... thank you very much
-Markus
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
The solid Black wires are grounds...
The dots only refer to what harness it is... for example red dots are front harness, silver dots are interior front, etc. the dots really have little to do with the color of the wire.
The dots only refer to what harness it is... for example red dots are front harness, silver dots are interior front, etc. the dots really have little to do with the color of the wire.
Thread Starter
Joined: Apr 2003
Posts: 1,711
Likes: 180
From: South Eastern USA
well i've got two black wires. one has a white stripe running down, the other has brown wrap around strips (they dont run the side of the wire)
Should i ground both?
Should i ground both?
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Sorry I was not clear... Solid black wires are ground.
A black wire with a white stripe is not solid colored. It is a stripped wire. Strippes do matter, dots on the other hand only refer to what harness the wire runs too/belongs in and can be ignored.
A black wire with a white stripe is not solid colored. It is a stripped wire. Strippes do matter, dots on the other hand only refer to what harness the wire runs too/belongs in and can be ignored.
Last edited by Icemark; May 8, 2003 at 07:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
DocHoliday89
3rd Generation Specific (1993-2002)
5
Oct 12, 2015 07:42 PM
