FC3S.USD

iTrader: (2)

I'm stripping my current FC, and Im having trouble taking out the whole wire harness, I cant believe it all fits through that little whole. If theres any tips on how to take it out, or if theres any connectors that I can disconnect please tell me.

Thanks

FC3S.USD

iTrader: (2)

I'm stripping my current FC, and Im having trouble taking out the whole wire harness, I cant believe it all fits through that little whole. If theres any tips on how to take it out, or if theres any connectors that I can disconnect please tell me.

Thanks

poor_red_neck

Dude... only hit the new thread button ONCE. It'll take a while, but usually work. Try turnig the plug sideways.. like.. long ways facing into the hole... and just carefully bend the wires to "wrap" around it.. I hope there is an easier way, than i know of

patman

iTrader: (3)

take it out from the inside...theres only the 3 connectors to the ecu..take them off, and the ties that hold the harness down...and then pull out on the outside until it pops out and you get to the place where it seperates into the 3 sets of wires, then pull out each clip individually. should come out real easy.

pat

FC3S.USD

iTrader: (2)

[IMG]http://[/IMG]