wiper switch only works on "low" setting. new relay didnt help
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2004
Location: washington
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
wiper switch only works on "low" setting. new relay didnt help
Year 87
Model Turbo II
Specifics: has rear wiper
my wiper switch only seems to work on the low setting and not on high or intermittent. I replaced the relay as all the DIY's suggested but it came out the exact same. everything else on the switch works. any ideas?
Model Turbo II
Specifics: has rear wiper
my wiper switch only seems to work on the low setting and not on high or intermittent. I replaced the relay as all the DIY's suggested but it came out the exact same. everything else on the switch works. any ideas?
#3
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2004
Location: washington
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
no just the one on the far "right"
relay 3 as identified here
http://fc3spro.com/TECH/HOWTO/WIPER/wiper.html
relay 3 as identified here
http://fc3spro.com/TECH/HOWTO/WIPER/wiper.html
#4
Senior Member
Join Date: Aug 2005
Location: Onanole, Manitoba Canada
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Is that not the default position when the switch fails ? I had to buy a good used one for my 88 vert.
The vert wiper switch is different as it has the control for the top built in.
The vert wiper switch is different as it has the control for the top built in.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM