Wiper motor and coolant gauge wiring
Thread Starter
Junior Member
Joined: Apr 2013
Posts: 13
Likes: 0
From: savannah GA
Wiper motor and coolant gauge wiring
I installed my haltech sprint re ecu. Got rid of the engine harness and realized I lost the wire to my wiper motor. Split it off from the engine harness but I can't find where it plugs into under the dash. A friend also told me that the coolant gauge wire is also in that wire bundle. That would explain no coolant temp on the dash. Any help?
I installed my haltech sprint re ecu. Got rid of the engine harness and realized I lost the wire to my wiper motor. Split it off from the engine harness but I can't find where it plugs into under the dash. A friend also told me that the coolant gauge wire is also in that wire bundle. That would explain no coolant temp on the dash. Any help?
Post 13 should help. Also, I pulled the coolant temp wire from the gauge cluster harness. I'd check the FSM on that one or directly trace it from the cluster. IIRC mine was yellow with white stripe. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Sai-Omega
New Member RX-7 Technical
32
Mar 20, 2016 02:53 PM
Dorito Powered
General Rotary Tech Support
2
Mar 9, 2016 10:57 AM
takhay
1st Generation Specific (1979-1985)
3
Mar 7, 2016 07:41 AM
