Wiper Module relay replacement
10-18-01, 07:57 PM
#1
Driving RX7's since 1979
Thread Starter
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
Wiper Module relay replacement
Ok, I've seen posts in the past on this subject. I think I want to take a shot. I'm asking anyone that has done this to please respond here or PM me.
Most important, I need detail info on the make and modle number of the replacement relays. Just want to avoid the brain damage of taking my old module to my local electronics parts place and digging through catalogues.
Any help out there would be MOST appreciated.
Thanks in advance.
Most important, I need detail info on the make and modle number of the replacement relays. Just want to avoid the brain damage of taking my old module to my local electronics parts place and digging through catalogues.
Any help out there would be MOST appreciated.
Thanks in advance.
10-19-01, 01:17 PM
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
I had a small 12v relay that didn't fit, so I just soldered 6 wires to the relay & wired it it the board. Taped it up put it back together. So now is goes tick tock with each cycle on intermittant, but it works great.
10-19-01, 03:54 PM
#3
Senior Member
Join Date: Apr 2001
Location: Dublin, VA
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
http://www.zapta.com/tal/rx7/wiper/main.html
This had instructions and a part# for the relay complete with where to buy it on line.
This had instructions and a part# for the relay complete with where to buy it on line.
10-19-01, 04:05 PM
#4
hambre y sueño
Join Date: Feb 2001
Location: 80* >
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
My wiper switch was REALLY fucked up, not the typical problem of only working in the "lo" position.
I changed the relays and it works better than what it was before but not like it should :o
I changed the relays and it works better than what it was before but not like it should :o
10-20-01, 07:14 AM
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Yet another link https://www.rx7club.com/vforums/show...ighlight=wiper by the way, have you tried the *search* engine for wipers on this site? Some people are not aware of it at all. The above link I remembered from a couple weeks ago and searched it out. I definetly remember one that refered to the link that gives instructions for removing and replacing a relay in the assy, but that fellow found out that it was one of the other relays in the assy and he gave numbers for the other relays.
Thread
Thread Starter
Forum
Replies
Last Post