Winshield wipers won't stop moving
09-07-05, 03:27 PM
#1
Newbie
Thread Starter
Join Date: Sep 2005
Location: minnesota
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Winshield wipers won't stop moving
Hey all,
My winshield wipers totally went crazy. I was driving home and the winshield wipers died at intermediate and II. only worked at I. So when i got further home i decided to shut it off.... When i went to OFF the wipers didn't stop wiping... and it didn't stop wipping at any setting... any ideas? how to fix?
My winshield wipers totally went crazy. I was driving home and the winshield wipers died at intermediate and II. only worked at I. So when i got further home i decided to shut it off.... When i went to OFF the wipers didn't stop wiping... and it didn't stop wipping at any setting... any ideas? how to fix?
09-07-05, 03:42 PM
#2
Eats, Sleeps, Dreams Rotary
09-07-05, 05:31 PM
#4
Senior Member
Join Date: Jul 2004
Location: Waco Texas
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Yea i agree with the above but if you want them to stop for the time being unplug them. You can either pull the dash apart which u will have to do anyways if you have icemark rebuild it and unplug it there. Or you can unplug the motor under the hood on the firewall
09-07-05, 05:50 PM
#5
Full Member
Join Date: May 2005
Location: Indianapolis
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
I mounted a cut switch to mine, only problem is it only has one speed. the plus side is I labled the switch "eject passenger" for every time my girlfriend gets out of line 
09-09-05, 08:24 AM
#7
Former Moderator. RIP Icemark.
The high/intermittent setting is a common failure of the internal relay- I can rebuild or sell you an rebuilt switch to fix it.
The wipers always on, can be a bad motor (in about half the cases it is) or a bad switch.
The wipers always on, can be a bad motor (in about half the cases it is) or a bad switch.
