Windsheild Wiper Problems
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: New Jersey
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Windsheild Wiper Problems
It seems that my windsheild wipers only work at one speed, if i try to change the speed to increase they just stop! What's the problem? and what can I do?
#2
Senior Member
Join Date: Jan 2004
Location: Delaware
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
Read the FAQ!!!
My wipers only work on low speed
The wiper switch has a relay inside that has failed. It will need to be replaced. There are several people that replace them, or you can do it yourself.
The wiper switch has a relay inside that has failed. It will need to be replaced. There are several people that replace them, or you can do it yourself.
#3
Former Moderator. RIP Icemark.
You can do it yourself (if you are good with the soldering iron, small hand tools and won't burn up the board):
http://2ndgenrx7.freeservers.com/cgi...%20switch.html (I also have the relays in stock on my website)
Or I can do it for you:
http://www.mazdamark.com/serv01.htm
Or you can buy a rebuilt one:
http://www.mazdamark.com/switches.htm
Or you can go to the dealer and spend $300+ on a new one.
http://2ndgenrx7.freeservers.com/cgi...%20switch.html (I also have the relays in stock on my website)
Or I can do it for you:
http://www.mazdamark.com/serv01.htm
Or you can buy a rebuilt one:
http://www.mazdamark.com/switches.htm
Or you can go to the dealer and spend $300+ on a new one.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM