will these work???
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: cali
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
will these work???
Two 15 x 7" gold mesh aluminum wheels. One wheel is new and has a Prime Wheel sticker on it. Offset is 20mm (approx 3/4"). Second wheel is used and in good condition, no markings or name brand appear on the wheel. By my measurements, offset is approx. 13mm ??? So I am guessing the wheel was really a 1/2" offset ? These wheels have rolled aluminum rim sections with cast centers and are lighter than cast rims. These wheels will fit a 4 bolt 4 1/4" bolt circle (4 x 108mm). They were originally sold to me as part of a lot of 4 on 4 1/2" bolt pattern wheels and one of these wheels is even erroneously marked 4 on 4 1/2" but both wheels are 4 on 4 1/4" bolt pattern. please respond i have a 87 n/a rx7 4 lug i dont know the pattern and if these will fit my car and i want to buy these.
#5
Former Moderator. RIP Icemark.
The offset is way off and will radiclly stress the bearings if you use them, as well as add all sorts of odd handling quirks.
In addition, the bolt pattern on the 4 lug FC is 4x4.5, so those wheels wouldn't even mount.
In addition, the bolt pattern on the 4 lug FC is 4x4.5, so those wheels wouldn't even mount.
Last edited by Icemark; 08-15-03 at 11:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM