Wierd sensor problem. Please help!!!
#1
Full Member
Thread Starter
Join Date: Sep 2004
Location: Louisville, Ky
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Wierd sensor problem. Please help!!!
What would/could happen if I unplugged a suspected bad sensor. I was having trouble with the engine sorta stuttering when I would press the accelerator, the check engine light came on, so I get the codes. It had a throttle position sensor code. So I checked the resistance and it was out of the range specified in the FSM at full closed and full open. So I adjusted it within limits and tried to run the engine. The engine started right up but when I would press the accelerator it would stumble and stutter just like before. So just out of curiousity I unplugged the TPS and tried to restart the car. It started right up and ran a little rough but did not stutter when I press the accelerator. Does this confirm that the TPS is bad or just a fluke?
Thread
Thread Starter
Forum
Replies
Last Post
imitek
3rd Generation Specific (1993-2002)
3
09-22-15 11:29 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM