Hey quick question. I just had my header installed yesterday and the guy accidentally bumped the zip ties off my ports. The air pump is removed w/ blockoff plate. But my actuators are going back and forth. I need to keep them open so i just need to know if its to the left or right that the need to be to stay open. thanks.

 

aux. ports?

 

yes the ones that have the actuators. but the actuators are now removed because i have no air pump. So the arms are swinging freely, and i need to know wich way they need to be so that the stay open.

 

All the tubes are plugged. Just so you know the ap was removed before i got the car i just had the header put on yesterday, and the guy bumped the zip ties loose. but i just need to know wich way do they need to be open, left or right as if you were looking at them from the same side [passenger].

 

they SHOULD be pulled down and in to be opened...the solenoid operates on Vac and would pull the arm towards itself....

 

so like if i was looking at them from a straight on view, they should be wired back inward? for example the one on th eleft would be goung right and the right one would be facing left?

 

bump