Who Used 10wattX10ohm resistors with there 720ccs?
#1
Daily Domestic Killer
Thread Starter
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
Who Used 10wattX10ohm resistors with there 720ccs?
Okay I am having a hell of a time installing these injectors, I want to run 15psi; I wanna know who has installed these and what watt resistors you've used?
#3
Daily Domestic Killer
Thread Starter
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
yeah thats what I ended up doing, care to explain how you did it? I just cut the harness off and connected the resistors to the power wire for the injectors, is this what you did? hopefully that will suffice....
#5
Rotary Enthusiast
Join Date: Mar 2001
Location: orlando ,fl
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
i think hypntz has a write up on his site !!!
in other words dont be so lazy and use the search button
youve been asking the same question for about 3 or 4 days !!!
why dont you send me a airplane ticket and ill install the freaking resistors ....
you need to use the search button
in other words dont be so lazy and use the search button
youve been asking the same question for about 3 or 4 days !!!
why dont you send me a airplane ticket and ill install the freaking resistors ....
you need to use the search button
#6
I came, I saw, I boosted.
Join Date: Apr 2001
Location: Windsor, Ontario, Canada
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
Woah.. someone's got their wankel in a twist....
Anyways, ya, there's lots of threads on this.
As for the resistor block, there are 5 wires, a middle one, and 4 outputs for the injectors.
There are two wires going to each injector, one of those is a different color for each injector, and the other wire is the same color.
Cut the wire that's the same color at each injector plug, connect all 4 of the (car side) SAME color wires together, (you don't have to- you can just use one, but I like being safe for voltage reasons) and then to the center wire on the resistor.
BTW, leave the different colored wires intact.
Then connect the 4 other wires on the resistor block to the injector, where the same colored wire was cut. One wire to each injector.
Very easy.
Anyways, ya, there's lots of threads on this.
As for the resistor block, there are 5 wires, a middle one, and 4 outputs for the injectors.
There are two wires going to each injector, one of those is a different color for each injector, and the other wire is the same color.
Cut the wire that's the same color at each injector plug, connect all 4 of the (car side) SAME color wires together, (you don't have to- you can just use one, but I like being safe for voltage reasons) and then to the center wire on the resistor.
BTW, leave the different colored wires intact.
Then connect the 4 other wires on the resistor block to the injector, where the same colored wire was cut. One wire to each injector.
Very easy.
#7
Daily Domestic Killer
Thread Starter
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
okay well I have search many freakin times no one ever gave me a complete write up on this, and none of this is of you are saying is in search I have search many freakin times or else I wouldn't be posting, And no thanks to you VMB, all you've done is freakin critisize me maybe I would of only had one post if you woulda gave me the link to that site your talking about.....
anyway enough bullshiting don't hijack my thread to talk ****!
Bambam I am only installing 720's in the secondary position so unless I am wrong wouldn't I use only 2 wires, and I measured the volts of each wire and am using the 12V (black) and both of the wire to my injectors have white and black wires, I have run each power wire to each resistors them self since there are 2 wires coming from each resistor block, one in, and one out, it seems to be working fine.
since I already cut the harness, I'm going to leave it this way, untill I get my hand on another resistor block and if I only need to used the power wires, not the ground wires, if there is a write up would someone be so kind to give me a link, I know you guys have told me, but it is very vauge and I need as much description as possible.
I'm confused where you say connect 4 wires, then you say there are 4 other wires on the resistor block, that would be a total of 9 wires, I only see 5....
anyway enough bullshiting don't hijack my thread to talk ****!
Bambam I am only installing 720's in the secondary position so unless I am wrong wouldn't I use only 2 wires, and I measured the volts of each wire and am using the 12V (black) and both of the wire to my injectors have white and black wires, I have run each power wire to each resistors them self since there are 2 wires coming from each resistor block, one in, and one out, it seems to be working fine.
since I already cut the harness, I'm going to leave it this way, untill I get my hand on another resistor block and if I only need to used the power wires, not the ground wires, if there is a write up would someone be so kind to give me a link, I know you guys have told me, but it is very vauge and I need as much description as possible.
I'm confused where you say connect 4 wires, then you say there are 4 other wires on the resistor block, that would be a total of 9 wires, I only see 5....
Thread
Thread Starter
Forum
Replies
Last Post