Who can guess what's wrong with my FC?!
#26
rottary89
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: OH, Cleveland
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Also, could you explain how timing can cause this problem... I'm having a hard time understanding
#27
Registered Loser
iTrader: (6)
Join Date: Dec 2002
Location: Whiterock
Posts: 2,224
Likes: 0
Received 0 Likes
on
0 Posts
I can't remember which way mine was off, but it would hit a wall at like 3.5 grand. spin it the other way and it would stumble and bog.
set the TPS first, then set the timing or it will be off. make sure you're idling at 750-800rpm and the car is fully warmed up before attempting either.
if the car was running fine the only things I can think of are the injectors or you caused a vac leak when you removed the manifold. only use OEM gaskets and zero silicone.
set the TPS first, then set the timing or it will be off. make sure you're idling at 750-800rpm and the car is fully warmed up before attempting either.
if the car was running fine the only things I can think of are the injectors or you caused a vac leak when you removed the manifold. only use OEM gaskets and zero silicone.
Thread
Thread Starter
Forum
Replies
Last Post
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM