Found this deal on these sparco wheels, i like em. they are 18X10's I know that pushin it hard under stock fenders ect. Anyone know what size 18s will fit under stock fenders, or offsets of ones that do?

 

oh correctment. 18x8 in front and 10 in back

 

There is a wheel fitment thread that covers this as well as reteds site.

What is the offset of these sparcos?

john ny

 

I'm pretty sure they will fit maybe a roll on the back.

the offset of the front seems good for a FC

Post the Offsets and i will tell you for sure if they will fit.

 

still waitin to get the offsets from the guy. I tried checkin the archives for that old wheel fitment thread i cant seem to dig it up.

 

he has no idea what offsets are, and he says its not labeled on the back of the wheel? shrug* Its on a supra

 

Show us a picture of them on a supra, we can prob tell you within a few mm.

John ny

 

from the pics is really hard to tell but i think its in the 15-35 offset range
and the rears are prob 25 or 30 they should fit with coilovers and a pull and roll

 

if you dont have the offsets and you can't test fit them then your best bet is to get back spacing... search google for how to measure backspacing

the rear back spacing is about 6" that will leave you a 1/4" to the trailing arm

the front depends on the suspension, stock type setup is just under 5" and coilovers will be about 5 1/4"

all of this also depends on tire sizing as well

if your going for a maximum fitment then i suggest test fitting them

 

I might meet up with the guy tommaro and toss em under the car to see how they fit. my cars on stock suspension at the moment but , real thought is to slap these on the project car w/coilovers. from my reesearch i have found 17x9's with +32ish. nothing on 18x9's.
Also found a good buy on some super advans 17x9 +30 offset.

 

gah got those messed up too. too many numbers to remember . heres a cut and paste
Super Advan SA3R
17" 5x114.3
17x9+42
AND
Super Advan SA3R Generation 2
18" 5x114.3
18x8.5+30
18x9.5+38

 

from what i have read. the 25-30+ offsets are flush with stock fenders.
He sold those sparcos yesterday.
SO the advans with the +42 offset, any idea if they would fit?

 

http://fc3spro.com/TECH/MODS/RT/rims.htm

18s would be badass. Respect to 3 spoke advans.

John ny

 

yea 18's would be bad ***. ive wanted these wheels for a long time , almost had a local buy on em from a buddy and day i got moneys he sold em. 600 bucks with good tires ... >>>>....<<<<!!!
So that thread yo linked me. The rears i would be +2 over the maximum and the fronts i would need overfenders. hmmm.decisions decisions

 

I still don't understand why 90% of FC owners go to this guy for wheel fitment.

 

I just figured the op wanted some safe bolt on acceptable guidelines.


Personally, i just cut and weld around the wheel.



john ny

 

Those are some really nice sparco's. Wouldn't mind having those on one of my rx-7s.

 

yea pretty sweet wheels , but they goner now . o well lol. too many nice shoes out there for cars im never happy with just one set lol

 

ne one runnin these size crazy wheels? 17x9 +42?